Effect of HF addition on the microwave-assisted acid-digestion for the determination of metals in coal by inductively coupled plasma-atomic emission spectrometry

The microwave-assisted acid-digestion for the determination of metals in coal by ICP-AES was investigated, especially focusing on the necessity of adding HF. By testing five certified reference materials, BCR-180, BCR-040, NIST-1632b, NIST-1632c, and SARM-20, it was found that the two-stage digestion without HF (HNO₃ + H₂O₂ was used) was very effective for the pretreatment of ICP-AES measurement. Both major metals (Al, Ca, Fe, and Mg) and minor or trace metals (Co, Cr, Cu, Mn, Ni, Pb, and Zn) in coal gave good recoveries for their certified or reference values. The possibility of ‘HF-memory effect’ was cancelled by the use of a set of vessels which had been never contacted with HF. Twenty-four Japanese standard coals (SS coals) were analyzed by the present method, and the concentrations of major metals measured by the present method provided very high accordance with those from the authentic JIS (Japanese Industrial Standard) method.     

A New Approach to the Construction of BEDT-TTF Derivatives Condensed with Heterocycles via BF3-promoted Reactions of Organotin Thiolates

The synthesis of BEDT-TTF derivatives fused with heterocycles (3–7) has been accomplished via the BF₃-promoted reaction of organotin thiolates (8 and 9) with electrophiles (10 and 11). Electrical conductivities of radical cation salts derived from some of them were also investigated.     

Two-dimensional network formation of cardiac myocytes in agar microculture chip with 1480 nm infrared laser photo-thermal etching

We have developed a new method that enables agar microstructures to be used to cultivate cells and that allows cell network patterns to be controlled. The method makes use of non-contact three-dimensional photo-thermal etching with a 1480 nm infrared focused laser beam, which is strongly absorbed by water and agar gel, to form the shapes of agar microstructures. It allows microstructures to be easily formed in an agar layer within a few minutes, with cell-culture holes formed by the spot heating of a 100 mW laser and tunnels by the tracing of a 100 microm s(-1), 40 mW laser. We cultivated rat cardiac myocytes in adjacent microstructures and observed synchronized beating in them 90 min after they had made physical contact. Our results indicate that the system can make and use microstructures for cell-network cultivation in a minimal amount of time without any expensive microfabrication facilities or complicated procedures.     

Thermal decomposition of vinylacetylene in shock waves

The thermal decomposition of vinylacetylene (C₄H₄) was studied behind reflected shock waves using both a single-pulse method (reaction time between 0.8 and 3.3 ms) and a time-resolved UV-absorption method (230 nm). The studies were done over the temperature range of 1170–1690 K at the total pressure range of 1.3–2.3 atm. The mechanism was used to interpret both the early and late stages of vinylacetylene decomposition at the high temperatures. It was confirmed that C₄H₄ dissociation proceeded through the following three channels. The rate constant expression of reaction (1) was determined as k₁ = 6.3 × 10¹³ exp(?87.1 kcal/RT) s^?1. The rate constants of the succeeding reactions (chain reaction, C₄H₄ + H → i-C₄H₃ + H₂ and C₄H₄ + H → C₂H₂ + C₂H₃ and decomposition reactions of free radicals, i-C₄H₃ + M → C₄H₂ + H + M) were confirmed or estimated. © John Wiley & Sons, Inc.     

Highly (Z)-selective hydrosilylation of terminal alkynes catalyzed by a diphosphinidenecyclobutene-coordinated ruthenium complex: application to the synthesis of (Z,Z)-bis(2-bromoethenyl)arenes

[reaction: see text] Complex 1 bearing a diphosphinidenecyclobutene ligand (DPCB-OMe) catalyzes highly stereoselective hydrosilylation of diethynylarenes with HSiMe2Ph to afford (Z,Z)-bis(2-silylethenyl)arenes. Treatment of the hydrosilylation products with N-bromosuccinimide causes bromodesilylation in a stereospecific manner, giving (Z,Z)-bis(2-bromoethenyl)arenes in high geometrical purity (>98%).     

Hydrogen activation on Mo-based sulfide catalysts,a periodic DFT study

Hydrogen adsorption on Mo[bond]S, Co[bond]Mo[bond]S, and Ni[bond]Mo[bond]S (10 1 macro 0) surfaces has been modeled by means of periodic DFT calculations taking into account the gaseous surrounding of these catalysts in working conditions. On the stable Mo[bond]S surface, only six-fold coordinated Mo cations are present, whereas substitution by Co or Ni leads to the creation of stable coordinatively unsaturated sites. On the stable MoS(2) surface, hydrogen dissociation is always endothermic and presents a high activation barrier. On Co[bond]Mo[bond]S surfaces, the ability to dissociate H(2) depends on the nature of the metal atom and the sulfur coordination environment. As an adsorption center, Co strongly favors molecular hydrogen activation as compared to the Mo atoms. Co also increases the ability of its sulfur atom ligands to bind hydrogen. Investigation of surface acidity using ammonia as a probe molecule confirms the crucial role of sulfur basicity on hydrogen activation on these surfaces. As a result, Co[bond]Mo[bond]S surfaces present Co[bond]S sites for which the dissociation of hydrogen is exothermic and weakly activated. On Ni[bond]Mo[bond]S surfaces, Ni[bond]S pairs are not stable and do not provide for an efficient way for hydrogen activation. These theoretical results are in good agreement with recent experimental studies of H(2)[bond]D(2) exchange reactions.     

Different reaction modes for the oxidative dimerization of epoxyquinols and epoxyquinones. Importance of intermolecular hydrogen-bonding

An oxidative dimerization reaction, involving the three successive steps of oxidation, 6 pi-electrocyclization, and Diels-Alder reaction, has been experimentally and theoretically investigated for the three 2-alkenyl-3-hydroxymethyl-2-cyclohexen-1-one derivatives epoxyquinol 3, epoxyquinone 6, and cyclohexenone 10. Of the sixteen possible modes of the oxidation/6 pi-electrocylization/Diels-Alder reaction cascade for the epoxyquinone 6, and eight for the cyclohexenone 10, only the endo-anti(epoxide)-anti(Me)-hetero and endo-anti(Me)-hetero modes are, respectively, observed, while both endo-anti(epoxide)-anti(Me)-hetero and exo-anti(epoxide)-anti(Me)-homo reaction modes occur with the epoxyquinol 3. Intermolecular hydrogen-bonding is found to be the key cause of formation of both epoxyquinols A and B with 3, although epoxyquinone 6 and cyclohexenone 10 both gave selectively only the epoxyquinol A-type product. In the dimerization of epoxyquinol 3, two monomer 2H-pyrans 5 interact with each other to afford intermediate complex 28 or 29 stabilized by hydrogen-bonding, from which Diels-Alder reaction proceeds. Theoretical calculations have also revealed the differences in the reaction profiles of epoxyquinone 6 and cyclohexenone 10. Namely, the rate-determining step of the former is the Diels-Alder reaction, while that of the latter is the 6 pi-electrocyclization.     

Polarized near-edge x-ray-absorption fine structure spectroscopy of C60-functionalized 11-amino-1-undecane thiol self-assembled monolayer: molecular orientation and evidence for C60 aggregation

Near-edge x-ray-absorption fine structure (NEXAFS) spectroscopy was adopted to probe the unoccupied electronic states of C60 anchored onto an organized assembly of 11-amino-1-undecane thiol on Au(111). The polarization dependence of the intensity of pi* resonance associated with C60 pi network revealed the self-assembled monolayer (SAM) system to be oriented with an average molecular tilt angle of 57 degrees with respect to the surface normal. Invoking the absence of solid-state band dispersion effects and in comparison to solid C60 and /or 1-ML C60/Au(111), the electronic structure of the resulting assembly was found dominated by spectral position shift and linewidth and intensity changes of the lowest unoccupied molecular orbital (LUMO), LUMO+1, and LUMO+2 orbitals. The latter implied hybridization between N Pz of -NH2 group of thiolate SAM and pi levels of C60, resulting in a nucleophilic addition with a change in the symmetry of C60 from Ih to C1 in the SAM. Occurrence of a new feature at 285.3 eV in the NEXAFS spectrum, assigned previously to pi* graphitic LUMO, signified the formation of aggregated clusters, (C60)n of C60 monomer. Low tunneling current scanning tunneling microscopy confirmed them to be spherical and stable aggregates with n approximately 5.     

Novel syntheses of 2,3-dihydro-5H-1,4-benzoxathiepins and 1,2,3,5-tetrahydro-4,1-benzothiazepines

2,3-Dihydro-5H-1,4-benzoxathiepins were prepared by intramolecular Friedel-Crafts reactions of ethyl α-[2-(aryloxy)ethylthio]-α-chloroacetates or by acid-catalyzed cyclizations of ethyl α-[2-(aryloxy)ethylsulfinyl]-acetate. 1,2,3,5-Tetrahydro-4,1-benzothiazepines were similarly prepared.     

Total synthesis of cis-solamin and its inhibitory action with bovine heart mitochondrial complex I

A convergent total synthesis of cis-solamin (1a) and its diastereomer (1b) was accomplished. A key reaction of this approach was the use of VO(acac)₂-catalyzed diastereoselective epoxidation of (Z)-bis-homoallylic alcohol 3 followed by spontaneous cyclization for the cis-THF ring formation. By comparison of the optical rotation of the two possible diastereomers, it is suggested that the absolute configuration of natural cis-solamin is 1a. Inhibitory action of synthetic 1a and 1b with bovine heart mitochondrial complex I are reported.